SekuseptMultienzyme

Sekusept™ Multienzyme

Thorough cleaning of medical instruments and endoscopes is a basic requirement for effective disinfection. The well-chosen combination of four enzymes with surfactants and other ingredients of Sekusept™ Multienzyme offers you an excellent cleaning performance. Sekusept™ Multienzyme is the ideal enzymatic cleaner for all types of medical instruments, including flexible endoscopes.
  1. Home
  2. Our Solutions
  3. Our Offerings
  4. Pre-Cleaners for Instruments
  5. Sekusept™ Multienzyme

Contact Us

Give Us a Call

Ecolab Gulf FZE
PO Box. 17063
JAFZA, Dubai, UAE

If you would like further information or to speak to an Ecolab representative:

Phone: +971 4 801 4000 | Fax: +971 4 884 1782 | Email: ecolab.healthcaremea@ecolab.com

Tell Us About Yourself
Where Are you Located?
How Can We Reach You?
What Can We Help You With?

Data Privacy Concerns? See our Privacy Policy.

 

Product Details

  • Optimally matched 4-enzyme combination
  • Very good material compatibility
  • RKI-conforming, non fixing pre-cleaning
Our performance Your advantage
Innovative combination of four enzymes with powerful surfactants Strong, self-cleaning Reduces pre- and post-cleaning expenses RKI-conforming pre-cleaning
Comprehensive material compatibility Suitable for pre-cleaning of thermo unstable and thermo stable medical instruments and flexible endoscopes
2 L bottles with viewing window Optimum fill level inspection and secure dosing
Low foam Suitable for ultrasonic application
Transparent blue coloring Visible cleaning solution with good recognition of the instruments

Depending on the type and degree of stains, prepare a solution of 0.3% (3ml/l) to 2% (20ml/l). Place the instruments to be cleaned in the solution, ensuring that all surfaces are completely wetted. Clean the instruments paying attention to the manufacturer’s instructions, including mechanical cleaning (e.g. brushing, wiping). When using in ultrasonic bath, cover the bath during sonication. Rinse with water of at least drinking quality. If disinfection is done subsequently, rough drying of the outer surfaces and particularly of cavities e.g. endoscope channels, is necessary in order to rule out any dilution of the disinfectant solution.

For the further terminal disinfection step, we recommend our product: Sekusept™ aktiv

Composition

Proteases, amylase, lipase, surfactants, corrosion inhibitors, solvents, additives, emulsifiers, perfume.

Use (after commencement) Shelf life
 
In container
 
until the printed expiration date
 
As a prepared application solution2
 
up to 14 days

1
Please note the following to ensure the correct storage of environmental hygiene and instrument disinfectants: The original containers (canisters, buckets or bottles) with the disinfectant concentrate (or powder) should be stored at temperatures below 25°C and kept dry and clean. A brief period below or above the given storage temperature (e.g. during transport) will not diminish the effectiveness.
The containers are to be sealed tightly after each use. Please also take care that the concentrate remaining in the container is not contaminated when preparing the application solution.

2
Assuming that the application solution that is produced is not contaminated by organic material, it is to be stored in a clean, closed container or a covered instrument basin.
Please take note of the corresponding marking on the containers in which the disinfectant solutions are kept, e.g. contents, concentration, date, shelf life and batch number. Used and organically contaminated solutions are to be changed at least once per workday as per RKI recommendation.

Chemical- physical data
Density 20 °C 1.06 g / cm3
pH value* (concentrate) 20 °C approx. 8.6
pH-range * (1-2% solution) 20 °C approx. 6 – 7

* pH-value measurements under operating conditions always using pH-meter with temperature compensation.

Order Information
For more product detail, pack sizes and all relevant order codes, please download the product brochure below.